Fixing VirtualBox Installation Fail On MacOS
Are you trying to install VirtualBox on your Mac and the installation keeps failing? Recently I had this problem as well. I thought that the application installation was fine even though it failed and could be opened. Well here is how to get this problem fixed.
Continue reading “Fixing VirtualBox Installation Fail On MacOS”
Increase your Raspberry Pi RAM using ZRam!
Is your Raspberry Pi running out of RAM quickly? Have you searched found a way to upgrade your Raspberry Pi RAM? I didn’t think so. ZRam is basically compressed memory similar/same to swap memory. This tutorial is based on NovaSpiritTech’s ZRam script, so credits to him.
- A Raspberry Pi 2 or better
- Raspbian on 8GB Micro SD card (minimum)
- Keyboard, mouse, power supply, monitor/TV
Continue reading “Increase your Raspberry Pi RAM using ZRam!”
Mining Verium Coin On Raspberry Pi?!?
Yes you can do Verium Mining (a crypto-currency) on a Raspberry Pi! The wallet that can be used with this coin has POS(Proof of stake) which means you gain coins passively. Profitability? We shall talk about that later in the post.
Continue reading “Mining Verium Coin On Raspberry Pi?!?”
Installing PINN on your Raspberry Pi
PINN (PINN is not NOOBS)can easily be installed on your Raspberry Pi is easy to do. It is better then NOOBS because PINN allows your to edit the config.txt file straight from the startup application. This can be useful if you overclocked your Raspberry Pi too much and it becomes unstable. PINN also supports custom OSes. You can add your existing versions of Raspbian, RetroPie, etc. As well as coming with large database of images, you can make multiple copies of the same exact OS. You can keep boot files on an SD card and keep OSes on a USB drive if needed. This means you only need a 4GB SD card!
Continue reading “Installing PINN on your Raspberry Pi”
Scanning local network for all IP Addresses
You need the IP address of a device on your local network and you don’t know what to do. Follow this tutorial to find out all IP addresses on your local network.
Continue reading “Scanning local network for all IP Addresses”
Were you thinking of making a WordPress site? Now you can! Just follow the tutorial on Wordpress/LAMP Installation On Raspberry Pi!
Continue reading “WordPress/LAMP Installation On Raspberry Pi”
Wifi on a headless Pi:
In this tutorial I am using Raspbian GNU/Linux 9 (stretch). WARNING: These ways of setting up wifi may change as newer version of Raspbian are released!
Setting up wifi via command line is pretty easy using ssh or from adding a file to your Raspberry Pi boot partition. Here’s how.
- Raspberry Pi
- 8GB Micro SD Card with Raspbian Lite
- Monitor or another computer
How do I start?
Continue reading “Setting up wifi on a headless Raspberry Pi”
Android On Raspberry Pi
Have you ever wanted a cheap android device? Well, now you can! We will be downloading and installing Android on a Raspberry Pi 3B! (or later, not 3A)
- Monitor or touchscreen
- Raspberry Pi 3B or later (3A cannot be used)
- 8GB Micro SD card (this is the bare minimum)
- Power supply
- Mouse, Keyboard is optional
how do i get android?
- Make an account on Emteria.com.
- Download the Emteria.OS Installer for your computer system.
- Open the downloaded file, and run the application.
- Insert a 8 GB Micro SD card into your computer.
- Open the installer and log in using your Emteria credentials.
- Follow the steps for Raspberry Pi 3B/3B+
- After the installation has finished, eject the SD card and pop it into your Raspberry Pi 3B/3B+ .
- Connect the Raspberry Pi to a monitor or television screen, keyboard, and mouse.
- Plug in a micro USB cable into an adequate power supply and the Raspberry Pi.
- Follow the setup process on your screen.
Something not working? Post a comment down below and I will try and help you.
Installing Conky (Raspbian/Debian):
Today we shall be installing Conky on Raspbian (Stretch 9).
- A Raspberry Pi 2+ (Not sure if it works on other Raspberry Pi)
- Raspbian OS
- Image writing software, Etcher
what is it?
Conky is a system GUI that reads your computer configuration such as RAM, CPU, SSD/HDD, Top Processes, etc. Conky is also configurable.
Continue reading “Installing Conky, A System Reading GUI (Linux)”
Raspberry Pi Images:
- A Raspberry Pi of course!
- Minimum of 8 GB SD card, preferably 16 GB or 32 GB.
- Image writing software, Etcher
Continue reading “Raspberry Pi Images”