Intel CPU performance tool
Intel CPU performance tool, a piece of software used to read various Intel CPU characteristics. Ever wanted to see the current clock speed of your Intel CPU or the power drawn by the CPU or the temperature of your CPU? Well, you can. Using this piece of software made by Intel themselves, you can monitor, clock speeds, temperature, the power drawn and even the utilization of the CPU in one gadget. This works with Intel CPUs on any software.
Continue reading “Intel CPU perfomance tool”
Raspberry Pi A gets an upgrade!
Well what do we have here? A new Raspberry Pi! We have a slimmed down cheaper version of the Raspberry Pi 3B+, the Raspberry Pi foundation is calling it the 3A+! Yes, the RPi model A is getting an substantial upgrade! The new 3A+ has the same form factor.
Continue reading “Raspberry Pi A gets an upgrade! (RPi 3A+)”
Installing PINN on your Raspberry Pi
PINN (PINN is not NOOBS)can easily be installed on your Raspberry Pi is easy to do. It is better then NOOBS because PINN allows your to edit the config.txt file straight from the startup application. This can be useful if you overclocked your Raspberry Pi too much and it becomes unstable. PINN also supports custom OSes. You can add your existing versions of Raspbian, RetroPie, etc. As well as coming with large database of images, you can make multiple copies of the same exact OS. You can keep boot files on an SD card and keep OSes on a USB drive if needed. This means you only need a 4GB SD card!
Continue reading “Installing PINN on your Raspberry Pi”
Downgrading Raspberry Pi kernel
You might have done a
rpi-upgrade and need to downgrade to a stable kernel. Downgrading Raspberry Pi kernel is easy. Here is how to do a downgrade.
Continue reading “Downgrading Raspberry Pi kernel”
Android On Raspberry Pi
Have you ever wanted a cheap android device? Well, now you can! We will be downloading and installing Android on a Raspberry Pi 3B! (or later, not 3A)
- Monitor or touchscreen
- Raspberry Pi 3B or later (3A cannot be used)
- 8GB Micro SD card (this is the bare minimum)
- Power supply
- Mouse, Keyboard is optional
how do i get android?
- Make an account on Emteria.com.
- Download the Emteria.OS Installer for your computer system.
- Open the downloaded file, and run the application.
- Insert a 8 GB Micro SD card into your computer.
- Open the installer and log in using your Emteria credentials.
- Follow the steps for Raspberry Pi 3B/3B+
- After the installation has finished, eject the SD card and pop it into your Raspberry Pi 3B/3B+ .
- Connect the Raspberry Pi to a monitor or television screen, keyboard, and mouse.
- Plug in a micro USB cable into an adequate power supply and the Raspberry Pi.
- Follow the setup process on your screen.
Something not working? Post a comment down below and I will try and help you.
Installing Conky (Raspbian/Debian):
Today we shall be installing Conky on Raspbian (Stretch 9).
- A Raspberry Pi 2+ (Not sure if it works on other Raspberry Pi)
- Raspbian OS
- Image writing software, Etcher
what is it?
Conky is a system GUI that reads your computer configuration such as RAM, CPU, SSD/HDD, Top Processes, etc. Conky is also configurable.
Continue reading “Installing Conky, A System Reading GUI (Linux)”
Raspberry Pi Images:
- A Raspberry Pi of course!
- Minimum of 8 GB SD card, preferably 16 GB or 32 GB.
- Image writing software, Etcher
Continue reading “Raspberry Pi Images”