Converting 2 separate existing Oses into a multi-boot with PINN

Multiboot image jpeg raspbian, retro pie

Converting 2 separate existing Oses into a multi-boot with PINN

Have you bought an HDD for your Raspberry Pi recently and want to transfer all your separate OSes to the HDD? With this tutorial, you will be able to transfer almost any OS into a multi-boot. Furthermore, you can also boot your Raspberry Pi from a Micro SD card, but the filesystem is on the HDD. Basically what this means is that the boot partitions will be stored on a Micro SD card and that the root partitions will be stored on the HDD. In this tutorial, we will be converting 1 Raspbian and 1 RetroPie Micro SD card into a multi-boot. Continue reading “Converting 2 separate existing Oses into a multi-boot with PINN”

Installing PINN on your Raspberry Pi

PINN logo upload PINN is not noobs

Installing PINN on your Raspberry Pi

PINN (PINN is not NOOBS)can easily be installed on your Raspberry Pi is easy to do. It is better then NOOBS because PINN allows your to edit the config.txt file straight from the startup application. This can be useful if you overclocked your Raspberry Pi too much and it becomes unstable. PINN also supports custom OSes. You can add your existing versions of Raspbian, RetroPie, etc. As well as coming with large database of images, you can make multiple copies of the same exact OS. You can keep boot files on an SD card and keep OSes on a USB drive if needed. This means you only need a 4GB SD card!

Continue reading “Installing PINN on your Raspberry Pi”

Android On Raspberry Pi 3B/3B+/CM Dev Kit

Android On Raspberry Pi

Have you ever wanted a cheap android device? Well, now you can! We will be downloading and installing Android on a Raspberry Pi 3B! (or later, not 3A)

Things needed:

  • Monitor or touchscreen
  • Raspberry Pi 3B or later (3A cannot be used)
  • 8GB Micro SD card (this is the bare minimum)
  • Power supply
  • Mouse, Keyboard is optional

Video Tutorial:

how do i get android?
  1.  Make an account on Emteria.com.emteria os website android raspberry pi
  2.  Download the Emteria.OS Installer for your computer system.emteria os download page
  3.  Open the downloaded file, and run the application.
  4.  Insert a 8 GB Micro SD card into your computer.
  5.  Open the installer and log in using your Emteria credentials.
  6.  Follow the steps for Raspberry Pi 3B/3B+emteria os installer raspberry pi 3B
  7.  After the installation has finished, eject the SD card and pop it into your Raspberry Pi 3B/3B+ .
  8.  Connect the Raspberry Pi to a monitor or television screen, keyboard, and mouse.
  9.  Plug in a micro USB cable into an adequate power supply and the Raspberry Pi.
  10.  Follow the setup process on your screen.

Something not working? Post a comment down below and I will try and help you.